Latest Articles

DTC B3855

{ No Comment }

Rollover Sensor Performance DTC B3856 Discard Rollover Sensor DTC B3857 Incorrect Rollover Sensor Installed Circuit/System Description The inflatable restraint vehicle rollover sensor (ROS) utilizes battery power supply and a bidirectional interface circuit. The ROS modulates current on the interface to send ID, State of Health and deployment commands to the inflatable restraint sensing and diagnostic […]

DTC B1530

{ No Comment }

Discard Passenger Presence System 1 Circuit/System Description When the ignition is turned ON, the inflatable restraint sensing and diagnostic module (SDM) performs tests to diagnose critical malfunctions within the Passenger Presence System (PPS). When the SDM has completed the power-up mode, the SDM will establish communication with the PPS. The SDM will increase a fault […]

DTC B1001

{ No Comment }

SDM Option Configuration Error Circuit/System Description When the ignition is first turned ON, the inflatable restraint sensing and diagnostic module (SDM) compares the restraints ID stored in the SDM to the restraints ID stored in the body control module (BCM). The restraints ID being compared contains the last four digits of the SDM part number. […]

DTC B0101

{ No Comment }

Discard Electronic Front End Sensor 1 DTC B0102 Incorrect Electronic Front End Sensor 1 Installed DTC B0103 Electronic Front End Sensor 2 Performance DTC B0104 Discard Electronic Front End Sensor 2 DTC B0105 Incorrect Electronic Front End Sensor 2 Installed Diagnostic Fault Information DTC B0100, B0101, B0102, B0103, B0104 or B0105 Circuit Short to Ground […]

DTC B0100

{ No Comment }

Electronic Front End Sensor 1 Performance

DTC B0098

{ No Comment }

Passenger Presence System Configuration Error Circuit/System Description When the ignition is turned ON, the inflatable restraint sensing and diagnostic module (SDM) performs tests to diagnose critical malfunctions within itself. When the SDM has completed the power-up mode, the SDM will establish communication with the passenger presence system (PPS). The PPS will respond by commanding both […]

DTC B0092

{ No Comment }

Passenger Presence System Performance Circuit/System Description When the ignition is turned ON, the inflatable restraint sensing and diagnostic module (SDM) performs tests to diagnose critical malfunctions within itself. When the SDM has completed the power-up mode, the SDM will establish communication with the passenger presence system (PPS). The PPS will respond by commanding both the […]

DTC B0083

{ No Comment }

Right Front/Passenger Seat Position Sensor Circuit DTC B0084 Left Front/Driver Seat Position Sensor Circuit Diagnostic Fault Information DTC B0083 or B0084 Circuit Short to Ground High Resistance Open Short to Voltage Signal Performance Seat Position Sensor – Left Circuit B0084 B0084 B0084 B0084 B0084 Seat Position Sensor – Right Circuit B0083 B0083 B0083 B0083 B0083 […]

DTC B0081

{ No Comment }

Incorrect Right Front/Passenger Side Impact Sensor (SIS) Installed DTC B0082 Discard Right Front/Passenger Side Impact Sensor (SIS) Diagnostic Fault Information DTC B0077, B0078, B0079, B0080, B0081 or B0082 Circuit Short to Ground High Resistance Open Short to Voltage Signal Performance Side Impact Sensor Signal Circuit Left/Right B0077, B0078 B0077, B0078 B0077, B0078 B0077, B0078 B0077, […]

B0070

{ No Comment }

DTC B0070 will set when one of the following conditions occurs: • Roof rail module – right high circuit is less than 2.4 volts and the roof rail module-right deployment loop is more than 6 ohms for 500 milliseconds. • Roof rail module – right deployment loop resistance is more than 4.8 ohms for 500 […]