Fastener Tightening Specifications: Refer to Fastener Tightening Specifications. Preliminary Procedure

1. Disable the SIR. Refer to SIR Disabling and Enabling.

2. Remove the windshield garnish molding. Refer to Windshield Pillar Garnish Molding Replacement.

3. Remove the upper center pillar trim panel. Refer to Center Pillar Upper Trim Panel Replacement.

4. Remove the rear body side upper garnish molding. Refer to Body Side Rear Upper Garnish Molding Replacement.

5. Ensure the roof rail inflator has been fully deployed before disposal. Refer to Inflator Module Handling and Scrapping.

1

Retainer, Inflatable Restraint Roof Rail Module

2

Screw, Inflatable Restraint Roof Side Rail Module Assembly (Qty: 2) Tighten: 2 N. m (18 lb in)

3

Bolt, Inflatable Restraint Roof Side Rail Module Assembly (Qty: 4) Tighten: 8 N. m (71 lb in)

4

Module Assembly, Inflatable Restraint Roof Side Rail

5

Screw, Inflatable Restraint Roof Side Rail Module Assembly (Qty: 3) Tighten: 2 N. m (18 lb in)

6

Bolt, Inflatable Restraint Roof Side Rail Module Assembly (Qty: 2) Tighten: 8 N. m (71 lb in)

7

Bracket, Inflatable Restraint Roof Side Rail Module Assembly

SEAT BELT RETRACTOR PRETENSIONER REPLACEMENT - FRONT

2007 RESTRAINTS Supplemental Inflatable Restraints - H3

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications. Preliminary Procedure

Fig. 59: Seat Belt Retractor Pretensioner Replacement - Front Courtesy of GENERAL MOTORS CORP.

Post A Comment