LOW AND REVERSE CLUTCH PISTON INSTALLATION

Tools Required

• J 23327-1 Forward Clutch Spring Compressor (Bridge). See Special Tools.

• J 34627 Snap Ring Remover and Installer. See Special Tools.

• J 36850 Transjel Lubricant

Installation Procedure

LOW AND REVERSE CLUTCH PISTON INSTALLATION

Fig. 263: Installing Transmission Seals Onto Low And Reverse Clutch Piston Courtesy of GENERAL MOTORS CORP.

1. Install the transmission (low and reverse clutch outer, center, inner) seals (696) on the low and reverse clutch piston (695).

2. Lubricate the seals with assembly lubricant J 36850 or an equivalent.

LOW AND REVERSE CLUTCH PISTON INSTALLATION

Fig. 264: Aligning Parking Brake Pawl Window With Notch In Piston Courtesy of GENERAL MOTORS CORP.

aligned with the parking brake pawl window, in the case.

LOW AND REVERSE CLUTCH PISTON INSTALLATION

Fig. 265: View Of Low And Reverse Clutch Spring Assembly & Retainer Ring Courtesy of GENERAL MOTORS CORP.

4. Install the low and reverse clutch spring assembly (694).

1. Using the J 23327-1 , compress the low and reverse clutch spring assembly (694). See Special Tools.

2. Using J 36850 install the low and reverse clutch retainer ring (693).

Post A Comment