REACTION CARRIER SHAFT REPLACEMENT Tools Required

• J 8092 Universal Driver Handle - 3/4 in - 10

• J 7004-A Universal Remover. See Special Tools.

• J 23907 Slide Hammer with Bearing Adapter

• J 25019-14 Stator Pump Bushing Remover

• J 29369-2 Bushing and Bearing Remover 2-3 in

• J 34196-B Transmission Bushing Service Set. See Special Tools.

Removal Procedure

REACTION CARRIER SHAFT REPLACEMENT Tools Required

Fig. 290: Identifying Reaction Carrier Components Courtesy of GENERAL MOTORS CORP.

1. Remove the reaction carrier shaft/internal gear retainer (668) and the reaction carrier shaft (666) from the input internal gear (664).

2. Inspect the reaction carrier shaft (666) and the input internal gear (664) for the following defects:

• Scoring

• Cracking

• Damaged or worn bushings

• A cracked shaft

• A damaged spline

• Damaged gear teeth

REACTION CARRIER SHAFT REPLACEMENT Tools Required

Fig. 291: Removing Reaction Carrier Shaft Front Bushing Courtesy of GENERAL MOTORS CORP.

REACTION CARRIER SHAFT REPLACEMENT Tools Required

Fig. 292: Using J 25019-14 & J 25019-14 To Remove Reaction Carrier Shaft Rear Bushing

Courtesy of GENERAL MOTORS CORP.

4. Using J 25019-14 with J 7004-A, remove the reaction carrier shaft rear bushing (667). See Special Tools.

Fig. 293: Installing Reaction Carrier Shaft Front Bushing Courtesy of GENERAL MOTORS CORP.

1. Using J 34196-3 which is part of kit J 34196-B with J 8092 , install a new reaction carrier shaft front bushing (665). See Special Tools.

REACTION CARRIER SHAFT REPLACEMENT Tools Required

J8092

REACTION CARRIER SHAFT REPLACEMENT Tools Required

Fig. 294: View Of Reaction Carrier Shaft Rear Bushing Courtesy of GENERAL MOTORS CORP.

2. Using J 34196-3 which is part of kit J 34196-B with J 8092 , install a reaction carrier shaft rear bushing (667). See Special Tools.

Post A Comment